Westcott 40-Degree Egg Crate Grid for Apollo Orb (43'')
HomeStore

Westcott 40-Degree Egg Crate Grid for Apollo Orb (43'')

Westcott 40-Degree Egg Crate Grid for Apollo Orb (43'')

Grids are made up of cells that control off axis light in four directions while maintaining the soft quality inherent in a large light source. They allow you to create separation and depth such as a hair light where you want to control just the light going onto the hair in order to separate it from the background. As light is focused into a forward direction through use of a grid, it can help to eliminate spill light or lens flare.

The off axis portion of the light is controlled by the cell size. The cell size (measured in degrees) describes the maximum cutoff angle of the off axis light. A 40-degree grid is the most popular degree used. Light loss at the center axis is minimal at a distance 3 to 4 times the diagonal dimension of the light source. On most models it is less than a 1/4 a stop of light.

Apollo Grids are soft and collapse down for easy transport and travel. Each unit comes with an included nylon carry case.

Grids easily attach through the use of hook and loop tape. When attaching, place your diffusion panel about 1/2 way in on the hook tape. This will leave enough room for the egg crate to attach directly in front of the diffusion panel. Grid corners are left unattached in order to provide the perfect fit. This allows you to stretch the grid taut and avoid sagging or drooping.

$26.21

Original: $74.90

-65%
Westcott 40-Degree Egg Crate Grid for Apollo Orb (43'')

$74.90

$26.21

More Images

Westcott 40-Degree Egg Crate Grid for Apollo Orb (43'') - Image 2

Westcott 40-Degree Egg Crate Grid for Apollo Orb (43'')

Grids are made up of cells that control off axis light in four directions while maintaining the soft quality inherent in a large light source. They allow you to create separation and depth such as a hair light where you want to control just the light going onto the hair in order to separate it from the background. As light is focused into a forward direction through use of a grid, it can help to eliminate spill light or lens flare.

The off axis portion of the light is controlled by the cell size. The cell size (measured in degrees) describes the maximum cutoff angle of the off axis light. A 40-degree grid is the most popular degree used. Light loss at the center axis is minimal at a distance 3 to 4 times the diagonal dimension of the light source. On most models it is less than a 1/4 a stop of light.

Apollo Grids are soft and collapse down for easy transport and travel. Each unit comes with an included nylon carry case.

Grids easily attach through the use of hook and loop tape. When attaching, place your diffusion panel about 1/2 way in on the hook tape. This will leave enough room for the egg crate to attach directly in front of the diffusion panel. Grid corners are left unattached in order to provide the perfect fit. This allows you to stretch the grid taut and avoid sagging or drooping.

Product Information

Shipping & Returns

Description

Grids are made up of cells that control off axis light in four directions while maintaining the soft quality inherent in a large light source. They allow you to create separation and depth such as a hair light where you want to control just the light going onto the hair in order to separate it from the background. As light is focused into a forward direction through use of a grid, it can help to eliminate spill light or lens flare.

The off axis portion of the light is controlled by the cell size. The cell size (measured in degrees) describes the maximum cutoff angle of the off axis light. A 40-degree grid is the most popular degree used. Light loss at the center axis is minimal at a distance 3 to 4 times the diagonal dimension of the light source. On most models it is less than a 1/4 a stop of light.

Apollo Grids are soft and collapse down for easy transport and travel. Each unit comes with an included nylon carry case.

Grids easily attach through the use of hook and loop tape. When attaching, place your diffusion panel about 1/2 way in on the hook tape. This will leave enough room for the egg crate to attach directly in front of the diffusion panel. Grid corners are left unattached in order to provide the perfect fit. This allows you to stretch the grid taut and avoid sagging or drooping.

You may also like

NEW
Thumbnail 1Thumbnail 2

Godox PRO Umbrella for AD300 Pro Flash (Silver) - 34"

$19.00

-65%NEW
Thumbnail 1Thumbnail 2

Godox DP1000III Professional Studio Flash Head

$249.00

$87.15

NEW
Thumbnail 1Thumbnail 2

Godox LSA-10 Dual Mount Arm

$79.00

-65%NEW
Thumbnail 1Thumbnail 2

Godox Barndoor Kit for AD300Pro

$24.90

$8.71

NEW
Thumbnail 1Thumbnail 2

Godox Barndoor Kit for AD400Pro

$24.90

NEW
Thumbnail 1Thumbnail 2

Godox Skirt for CS-85D Latern Softbox

$19.00

-65%NEW
Thumbnail 1Thumbnail 2

Godox Skirt for CS-65D Latern Softbox

$19.00

$6.65

NEW
Thumbnail 1Thumbnail 2

Godox Bowens Mount To S30 Mount Adapter

$24.00

-65%NEW
Thumbnail 1Thumbnail 2

Godox Long Focus Reflector for AD400Pro Flash Head

$21.90

$7.66

NEW
Thumbnail 1Thumbnail 2

Godox Color Temperature Set for Round Flash Heads

$13.90

-65%NEW
Thumbnail 1Thumbnail 2

Godox VC26T Multi-Battery Charger for V860III / V1

$35.00

$12.25

NEW
Thumbnail 1Thumbnail 2

Godox Snoot for AD400Pro

$18.00